How to Reset Reolink Argus 3 Pro
If you need to restore a Reolink Argus 3 Pro camera after a setup change, connection issue, or ownership transfer, knowing how to reset Reolink Argus 3 Pro the right way saves time and prevents pairing problems.
This guide explains the reset process, what each reset does, and how to get the camera back online afterward.
What a reset does on the Reolink Argus 3 Pro
The Reolink Argus 3 Pro is a wireless, battery-powered security camera that stores Wi-Fi settings and pairing data locally.
A reset clears those settings so the camera can be configured again with the Reolink app.
- Factory reset: Removes saved Wi-Fi and device configuration.
- Re-pairing: Lets you add the camera back to a new or existing account.
- Troubleshooting: Often fixes setup failures, offline status, or camera migration issues.
A reset does not usually erase video stored on a microSD card, but footage saved to the cloud depends on your Reolink Cloud plan and account access.
When should you reset the camera?
A reset is useful when the camera will not connect, a password changed, the router was replaced, or you are handing the device to someone else.
It is also a common step after firmware updates, failed Bluetooth pairing, or repeated “device offline” alerts.
Before resetting, confirm whether the problem is actually related to Wi-Fi coverage, battery level, or app permissions.
In many cases, moving the camera closer to the router or charging the battery can resolve the issue without a reset.
How to reset Reolink Argus 3 Pro using the reset button
The Argus 3 Pro includes a physical reset button on the camera body.
This is the standard method for restoring the device to its default state.
Step-by-step reset process
- Power on the camera and make sure the battery has enough charge.
- Locate the reset button on the camera.
- Press and hold the reset button for about 10 seconds.
- Release the button when you hear the voice prompt indicating the reset is complete.
- Wait for the camera to restart.
After the reset, the camera returns to its default state and is ready to be added again in the Reolink app.
What if the reset button does not seem to work?
If the camera does not respond to the reset button, the issue is often power-related.
The battery may be too low, the device may be frozen, or the camera may not be fully on.
- Charge the battery: Connect the camera to a charger and wait until it has sufficient power.
- Try again: Hold the reset button for the full recommended time.
- Check for startup behavior: Listen for voice prompts or indicator lights that show the camera is active.
- Inspect for damage: If the button is stuck or unresponsive, physical wear may be the cause.
If the camera still will not reset, remove it from the app first if possible, then power it down, recharge it, and attempt the reset again.
How to add the camera again after a reset
Once the camera is reset, it must be paired again in the Reolink app.
This is the step many users miss, especially after switching phones or Wi-Fi networks.
Re-pairing steps in the Reolink app
- Open the Reolink app and sign in to your account.
- Tap the add-device option.
- Scan the QR code on the camera or enter the device ID manually.
- Follow the setup prompts to connect the camera to your Wi-Fi network.
- Confirm the live view appears and test motion alerts.
Use a stable 2.4 GHz Wi-Fi network during setup.
The Reolink Argus 3 Pro does not rely on 5 GHz setup in the same way many dual-band devices do, and weak signal strength can interrupt pairing.
How do you reset the Reolink Argus 3 Pro safely?
To reset the Reolink Argus 3 Pro safely, avoid interrupting the process once you begin.
Do not remove the battery mid-reset or press random buttons while the camera is rebooting.
- Keep the battery charged before starting.
- Use the Reolink app only after the reset is complete.
- Make sure you have your Wi-Fi name and password ready.
- Record your settings if you need to restore schedules or alerts later.
If you are resetting the camera for resale or transfer, also remove the device from your Reolink account so the next owner can pair it without account conflicts.
Reset versus removing the device from the app
Many users confuse removing a camera from the app with resetting the camera itself.
These are related but different actions.
- Removing from the app: Deletes the device from your account and app view.
- Factory reset: Clears the camera’s stored network and device settings.
For troubleshooting, you may need both.
If the device is still tied to an old account or connection profile, removing it from the app first can help prevent setup errors after the reset.
Common problems after a reset
Even after a successful reset, some users run into setup issues.
Most of these come from Wi-Fi configuration, account mismatch, or incomplete pairing.
Camera will not connect to Wi-Fi
Check that the router is broadcasting 2.4 GHz Wi-Fi, the password is correct, and the camera is within range.
Network security settings such as MAC filtering or firewall restrictions can also block the connection.
The app says the device is already bound
This usually means the camera is still linked to another Reolink account.
Sign out of the old account, remove the device properly, or contact Reolink support if the previous account cannot be accessed.
Live view loads slowly after reset
Slow live view is often caused by weak signal strength, overloaded Wi-Fi, or a temporary app sync delay.
Moving the router closer or reducing network congestion may help.
Best practices to avoid repeated resets
Frequent resets usually point to a larger setup problem.
Stable placement, proper charging habits, and clean Wi-Fi setup reduce the need to repeat the process.
- Keep the camera within reliable Wi-Fi range.
- Charge the battery before firmware updates and long setup sessions.
- Use a strong router password you can re-enter correctly.
- Update the Reolink app and camera firmware when available.
- Document your device settings for easier recovery later.
If your Argus 3 Pro repeatedly goes offline, investigate battery drain, signal interference, and router reliability before assuming the camera itself needs another reset.
What should you remember before resetting?
A reset is a practical fix for many Reolink Argus 3 Pro issues, but it works best when you prepare for re-pairing immediately afterward.
Have your Wi-Fi details, Reolink account access, and charging cable ready so the camera can be set up again without delays.